A Digital Angle Finder is a valuable item to have in your tool box. It will make measuring the distance between objects easier and quicker, which will save you money in the long run. But you need to know how to use it before you can start using it. The article below will give you some pointers on how to use this product, as well as some tips for obtaining the most accurate results possible.
Click here to see our product recommendation!
Powering up
A Digital Angle Finder is a cool gadget. Not only can it help you measure a wide variety of angles, it can also do a good number of things that a conventional measuring tool can't. For example, it can measure 360 degrees and can be attached to metal surfaces. If that's not enough, it can stick to non-magnetic surfaces as well. The resulting measurement of relative angles can be used in a variety of applications, from telecommunications to construction. Its large LCD display can be switched on and off, and the device is remarkably easy to use.
The digital angle inclinometer has four selections of measuring units. These include degrees, radians, and percentages, with the latter being the most convenient for a user. They all measure with an accuracy of plus or minus 0.5 degrees, with the former being a bit more accurate. There is no need to readjust the meter after you have set it, as it automatically displays the newest reading. The included re-usable sticky pad makes it easy to mount the device on any smooth surface. In addition, it comes with a handy user's manual and a USB charging cable.
While the inclinometer does a good job of measuring a plethora of angles, its true-color display and accompanying re-usable sticky pad make it the perfect measurement device for any home or office. The resulting measurement of relative angles can also be used in a variety of applications, including telecommunications, construction, and automobile test and repair. One of the best things about it is its comparatively small size. Despite its small dimensions, the meter can be used to measure a range of 10 meters. You can easily attach it to a wall, table, or even a window, allowing it to be a useful tool for almost any professional or DIYer.
However, before you can use it to its full potential, you will need to power it up. This can be achieved with a single button press, if you are lucky. The most obvious solution is to put it on a flat surface and hold the button for two seconds. Once you have done so, you should get a message informing you that your inclinometer is ready to go.
Placing the meter on a non-magnetic vertical surface
An angle finder is a handy gadget if you have to work on vertical surfaces. It can be useful for measuring angles on metal, wood or painted surfaces. You will need a level line of sight and a well defined object for precision measurement. A magnetic base is also helpful. A laser inclinometer is a neat little tool that helps you out with a range of measurements. The digital version comes with two lasers and a LCD display. One of the most useful features is the ability to use the device as a simple laser level. This is especially helpful for steel work.
In order to do it right, you need to take your time. First, the magnetic back needs to be placed on the surface of choice. Next, you need to rotate the device 180 degrees to check for accuracy. If you are unsure how to do this, you can always use the calibration mode. The most rudimentary way to do this is to place the device on a square plate and attach a nail or screw to it. It's important to remember that this is not a replacement for a standard caliper. While it can be used to measure a range of angles, its accuracy is limited to one arcsecond. Also, it may require a bit of self-calibration to get the most accurate readings. With that said, the digital inclinometer is a cinch to use and boasts some of the best accuracy in its class.
The other big ole' number is the digital inclinometer's ability to measure the angle of a sloping line. Although this feature is not marketed as well as the aforementioned, it does have the advantage of being able to display percentage grade. Other niceties include a soft-sided pouch, a re-usable sticky pad and a USB charging cable. All in all, this is a great value for money, smallish package.
Testing the accuracy
If you've decided to purchase a Laser Angle Meter Casting Tool Inclinometer Protractor, there are several things to keep in mind. First, you will need to ensure that the device you choose has a magnetic back. You also want to place it in the same spot on a surface you are using to make measurements. Once you have set up your device, you can begin measuring angles. As you measure, you may need to self-calibrate the angle finder. This will be indicated by the display. It will show a "2" if it needs to be calibrated.
The Digital Angle Gauge has a large LCD display with backlight to display measured values clearly. It can be switched on or off freely, and has a five-minute auto-off feature. When the tool is upside down, the display automatically inverts. Before you start measuring, you will need to make sure that you have a clear line of sight. A good way to do this is to place the device on a surface that is flat. Afterward, rotate the device so that you can look at the back of the instrument. To do this, you'll need to press the middle button.
The right-hand button has two functions. While holding the button down, toggle through the degrees and percentage slope modes. After this, you can then release the button. The inclinometer's accuracy is based on a combination of hysteresis and repeatability. As a result, the sensor can have an error of +-0.5 deg. But, depending on the technology, output resolution can be limited to a few thousandths of a degree.
If you are unsure of the accuracy of the device, try it out on a wall or other vertical surface. Make sure to rotate it 180 degrees afterward to check its accuracy. For best results, the device should be able to measure a 0.2 degree tolerance. Whether you need to measure the angles of a beam or a vertical surface, the Digital Angle Gauge will provide accurate measurements. And the clear and visible display makes it easier to understand what you're seeing.
Self-calibrating the meter
A self-calibrating angle finder can be used on vertical surfaces like walls and steel. The inclinometer has a magnetic back and stick-on pad for wall mounting. It has two laser lines for measuring angles. You can get readings in degrees and percentages. However, it may be difficult to get a perfect level. To make sure it works, it is important to calibrate it on a flat surface first. After you have attached the device to a surface, you must press the middle button to switch to calibration mode. The display will show "1" when you are in this mode. Next, you need to hold the buttons for about 2 seconds. Afterwards, rotate the angle finder 180 degrees to check its accuracy. If the unit is not level, an error message will appear. Once it is, you can use it.
This digital inclinometer can be used to determine the position of shelves or other objects on a vertical surface. In addition, it can be used as a simple laser level for walls. It features an internal Li-ion rechargeable battery and a large LCD display. The angle finder comes with a re-usable sticky pad for mounting on non-magnetic surfaces.
Another advantage is it has an automatic power-down feature. If you forget to turn off the device, it will automatically shut down after 500 hours of use on a single 9V battery. Also, the angle measure can be recalibrated on any flat surface. With it, you can choose to view all of the angles within the 360 degree range in digital form. It also has a rugged electronic sensor and a liquid crystal display. Plus, you can freeze any angle you want to save or take a reading from an alternate reference surface. And because it is made from durable materials, the device can be used outdoors without fear of breaking or bending. Whether you are a novice or a professional, it has everything you need to get the job done right.