Highbanking is an alternative to traditional placer mining by using a DIY Highbanker. Highbanking uses equipment like pumps, sluices, and more to extract gold from sand and other solids. It is a process that has been around for centuries. Today, it's still used as a way to sift for gold. The best part is that it's also a very eco-friendly activity.
Full DIY plans are available here!!
Set up
When you are mining, you want to set up your DIY Highbanker so you can get the best gold recovery possible. Fortunately, there are ways to do this that are easy to use. The key is to keep the setup simple so that it is more effective. For example, you should place the high banker directly above the source of the material you are working with, or as close to the site as possible.
Another option is to locate your high banker in a natural settling pond. This is a great way to recycle muddy water and collect gold from fine materials. However, it is important that the container you use is large enough to hold all the concentrate you will find. You also need to make sure that the container is secure and that it doesn't move.
Finally, you need to check the riffles on a regular basis. Most of the black sand will get stuck up in the first foot of the riffles, which means that you need to clean them out. In addition, you will want to keep an eye on your riffles as you feed material into them.
Feeding
When you're mining gold, the best way to get the most bang for your buck is to find an efficient method of feeding the material from your rig to your gold panning rig. One such technique is the highbanking feed method. A highbanker is a machine that screens gravel into two or more piles, which is then fed into a riffle or pan to extract the gold. With a little care and attention, a highbanker can last for years. It's easy to use, and it's a big time saver. However, it's important to choose a highbanker that is the right size for your needs. If you're looking for a machine that will do the job right, you'll want a unit that is at least 8 feet long.
Sluicing
Sluicing highbanking is a technology that uses a pump to force water over a series of riffles. The riffles are designed to separate rocks from the larger stuff. They work best when used in conjunction with a sluice box. A sluice box can be easily modified to handle dredging or even a full-scale mining operation.
There are many different types of sluice boxes. While most use a similar design, a number of manufacturers offer slightly different features. One manufacturer, Jobe, produces small, recirculating sluices. In addition to these, a variety of larger units are available. Some are designed specifically for dredging, while others are more traditional sluice boxes. Another type of machine is a specialized "high banker," which is attached to a sluice box and is placed above the source of the water. It has a large grizzly at the head of the unit, which speeds up the process by filtering out bigger rocks. This is the best kind of machine to use if you have a lot of material to process.
It is a good idea to obtain a highbanking permit. If you don't, you might be shut out of the market, even if you're using the highest quality equipment.
Recirculating highbankers
A recirculating highbanker can be a boon to those of us who are lucky enough to live in a place with a steady stream of water. With such a unit in hand, you can easily process your paydirt without having to go to the trouble of finding a water source. They are also great for desert claims, where you can process your paydirt from the comfort of your home. The Mini-Recirculating Highbanker from Gold Buster is one such unit.
This unit comes equipped with a number of features and gizmos. Among them is a recirculating pump, a four foot hose and a recirculating hopper. There are also adjustable legs for slope control. It is also notable for the fact that it is made of lightweight aluminum, making it portable and durable.
Grizzly at the head of the unit
The head unit for a highbanker has a grizzly attached. This device sorts and feeds material from the main hopper, through the grizzly, and into the sluice tray. This reduces the amount of downtime and the amount of gravel that needs to be handled. It is very important to feed the high banker at a steady rate so that it doesn't overload.
The grizzly at the head of the unit is used to screen out large rocks and to remove slow-producing materials. Depending on the size of the grizzly, this process can take several minutes. However, the results are worth the time. During this process, large nuggets and gold can be chucked out into the tailings. Keeping the grizzly clean and properly maintained will also ensure that it will not need to be repaired as often.
When a rock is loaded into the grizzly, it passes through a grid of heavy steel bars. The bars are held together by long bolts that are at right angles to each other. They should be sized to allow for good clearance between the bars. If there is too much gravel or too many rocks, the grizzly will not be able to handle the material and will start to overflow. This will lead to lower efficiency of the sizing process.